The report must include:
– Detailed description of the hardware, their types/sizes (classification) and the materials they are made from (support your discussion with neat pictures of hardware with proper referencing)
– Discussion on the applications of each hardware
– Briefly discuss the international standards associated with the use of the hardware
– Discussion on the limitations/constraints on the use of each hardware
Background:
The engineering structures such as aircraft, ships and vehicles consist of typical engineering hardware like mechanical fasteners; fluid lines, pipes and unions; springs and gears; mechanical drives; couplings; clutches; brakes, bearing and seals; control cables etc. Examples of civil engineering structures include buildings, bridges, dams and roads. Typical hardware involved in handling, processing and testing of wood, masonry, concrete and bituminuous materials used in the construction of civil engineering structures and roads.
Each hardware plays an integral and significant role in the smooth operation of any engineering device. Generally, engineering hardware come with specification which is a statement of detailed particulars, describing certain characteristics of an item such as dimensions or unusual features.
Procedure:
Write a research based report (1000 words) on this subject taking into consideration the following key features (Also, please refer to the attached rubric for standard expectation of the report quality):
• Executive Summary – Abstract
• Introduction: Briefly describe the purpose of your report
• Main body: Please refer to the task section and address all the bullet points listed there.
• Conclusion: Summarise your work and report the key finding of the report.
References: Harvard Referencing (at least 5 refrences).
0 comments