1. A residential water piping system to an upstairs shower is comprised of three components. First, a
commercial steel main line, 2.54 cm in diameter and 10 m long, supplied by a static pressure of 550 kPa.
The last bit of the steel pipe includes an abrupt contraction to the diameter of the second segment of
pipe. Second, a drawn copper pipe, 1.27 cm in diameter and 8 m long, rising a total of 6 m in elevation
and containing two short-radius 90◦
elbows, two T-joints with inline flow, and one fully-open globe
valve, and an abrupt contraction to the diameter of the third segment of pipe. Third, 1 m of 0.95 cm
diameter drawn copper pipe, rising 1 m in elevation and discharging to atmospheric pressure through
a showerhead of K = 1.5. Water is supplied at 20 ◦C and the shower is unheated.
In this project we have to solve this problem using matlab and autocad i have already solved it analytically i just need someone to write the code and do the cad part
0 comments