Project Details:
The
project will involve the Silo Simulator within LogixPro 500. Follow all the Project
Parameters listed, include an explanation of how your project works.
Design a program that will move boxes to a filling station while the SELECTOR SWITCH is in position A.
- When the START switch is pressed, the RUN light should come ON.
- The
first box arrives at the filling station and activates a PROX SENSOR,
then activates a 5 second timer to pause the process then starts filling
the box after 5 seconds is complete. - While the box is filling,
the FILL light should flash ON/OFF at a 1 second interval. The FILL
light should go OFF when the box is full. - Once the box is full, the FULL light should come ON, and activate a second timer to wait an additional 5 seconds.
- After
the last 5 second interval is complete, the box should move away from
the fill station, and the FULL light should go OFF, so the next box can
arrive to be filled. - The process should repeat.
- Once 10 boxes have passed the PROX SENSOR, the process should shut down. Also the RUN light should go OFF.
- To
restart the process, move the SELECTOR SWITCH to positon B to reset the
counter. Move the SELECTOR SWITCH back to positon A, depress the START
SWITCH to restart the system for the next 10 boxes. - If the STOP switch is pressed the system will stop, and the RUN light should go OFF.
- The START switch will have to be pressed to start the control system again.
0 comments