Please answer all requirement and attach a Multisim file to prove that the circuit is working:
Question:
Design circuit that has an input w and an output z. The circuit is a sequence detector that produces z = 1 when the previous two values of w were 00 or 11; otherwise z = 0.
For the traffic light, implement your design in software by using Multinism, as input (Time) use a clock, and the six outputs are G, y, and R on each side (use color LEDs). Test its operation and show that work to your teacher.
Then, Build your controller in hardware. Use color LEDs to the output. Test your circuit, first, instead of clock uses a switch and show that the sequence of your controller works. Then replace the switch for a clock signal of frequency 1 Hz or T equals 1 second. Show to your teacher the correct operation of your circuit.
For the second problem, draw the state diagram, true table and Implement your design in software by using Multisim. Test its operation and show that work to your teacher.
Then, Build your circuit in hardware. Use color LEDs to the output and input. Test your circuit. Show to you teacher the correct operation of your circuit.
Write a report with goals, pictures of your design, state diagram, true table, pictures of your hardware, etc. and conclusion.
0 comments